NEW FOR 2025! Beretta Tactical Carbon Fiber Magazine Cover

Replace your plastic magazine cover with the Briley Carbon Fiber Magazine cover. Made from 6061-T6 Aluminum and 3k 2X2 Twill Weave Carbon Fiber and weighing in a 2.2oz, the Briley Carbon Fiber Magazine cover adds rigidity and style with a minimal increase in weight over the factory plastic cover.

Due to increased diameter of the carbon fiber(1 5/16") over the factory plastic magazine cover(~1 3/16"), the factory barrel clamp will not fit. The locking detent serrations have been re-designed to better prevent loosening of the magazine cover. However, we recommend periodically checking that the magazine cover is tight as with any shotgun. This magazine cover has a larger base diameter to improve handguard retention and negate the need for the additional ring when using Briley Handguards, but is still sized to fit factory forends.

FITS: Beretta 1301 Tactical and A300 Ultima Patrol models with factory 7 round magazine tubes ONLY. The threaded end of the gold factory magazine is approximately 18" from the front of the receiver on models that fit this cover.

Pease note, this is NOT A MAGAZINE EXTENSION.  This replaces the factory plastic magazine cover.